DEVELOPMENT OF THE METHODOLOGY AND SUBSTANTIATION OF FUEL SUPPLY PARAMETERS IN THE TRANSITION TO BIOFUEL
Keywords:
fuel, modeling, nozle, torch, fuel injection, biodiesel, mixture.Abstract
Changing the nature of the workflow of the diesel engine, increasing its technical and economic performance when converting to work on alternative fuels is pronounced when using mixed fuels. The differences between these properties of the components of different in both composition and ratio of fuels affect primarily the process of fuel supply, fuel spraying, evaporation and mixture formation.
The article proposed a technique for reconfiguring the fuel supply system to operate on biofuel. Also, the parameters of the systems operation when using the F-22 injector were substantiated, at which the performance of the power system will be achieved closest to the nominal values.
References
A. Demirbas Biodiesel: a realistic fuel alternative for diesel engines, Springer-Verlag London Limited, 2008, 208 p.
S.A. Burlaka,, V.V. Yavdyk,, A.P. Yelenych, Metody doslidzhenʹ ta sposoby otsinky vplyvu palyv z vidnovlyuvanykh resursiv na robotu dyzelʹnoho dvyhuna. Visnyk Khmelʹnytsʹkoho natsionalʹnoho universytetu, 2019, 2(271), рр. 212–220.
A.P Marchenko, A.F. Minak, I.A. Slabun Comparative evaluation of the efficiency use of vegetable fuels in a diesel engine, Internal combustion engines, 2004, No. 1, pp. 46-51.
S.A. Burlaka Rozrobka zmishuvacha biodyzelʹnoho palyva ta modelyuvannyam protsesu zmishuvannya. Visnyk mashynobuduvannya ta transport, 2020, № 1 (11), Р. 11-17.
I.V. Gunko, S.A. Burlakа, A.P. Yelenich Environmental assessment of petroleum fuels and biofuels using full life cycle methodology, Bulletin of the Khmelnytsky National University, 2018, Volume 2, No. 6, P. 246-249.
I.G. Grabar, R.V. Kolodnitskaya, V.G. Semenov Biofuels based on oils for diesel engines: monograph, Zhytomyr: ZhSTU, 2011, 152 p.
V.F. Anisimov, L.P. Sereda, V.B. Ryaboshapka, A.A. Pyasetskii Investigation of the influence of the supply forward angle on the performance of diesel while transferring it to biodiesel, Industrial Hydraulics and Pneumatics, 2008, No. 2, pp. 101-106.
V.G. Semenov, V.P. Komakha, V.B. Ryaboshapka Modeling of combustion process in tractor and combine diesels working on different types of fuel using the refined model II. The vibe is by approximating the experimental data. APC, Energy, Transport, 2015, No. 1, pp. 52-58.
D. Borysiuk, A. Spirin, I. Kupchuk, I. Tverdokhlib, V. Zelinskyi, Ye. Smyrnov, V. Ognevyy The methodology of determining the place of installation of accelerometers during vibrodiagnostic of controlled axes of wheeled tractors. Przegląd Elektrotechniczny, 2021, Vol. 97, № 10, P. 44-48. https://doi.org/10.15199/48.2021.10.09.
V. Rutkevych, I. Kupchuk, V. Yaropud, V. Hraniak, S. Burlaka Numerical simulation of the liquid distribution problem by an adaptive flow distributor. Przegląd Elektrotechniczny, 2022, Vol. 98, № 2, P. 64-69. https://doi.org/10.15199/48.2022.02.13.
V.S. Rutkevych, V.M. Yaropud, I.M. Kupchuk, O.O. Ostapchuk Imitatsiyne modelyuvannya ta doslidzhennya roboty hidropryvoda vidokremlyuvacha steblovykh kormiv z transheynykh skhovyshch. Vibratsiyi v tekhnitsi ta tekhnolohiyakh, 2021, № 3 (102), Р. 88-99.
S.A. Burlaka, V.M. Yaropud, N.H. Zdyrko Rekomendatsiyi shchodo otsinky ta diahnostuvannya dyzelʹnoho dvyhuna pry vykorystanni biopalyva. Herald of Khmelnytskyi National University. Technical sciences, 2021, № 4 (299), Р. 169-174.
V. M. Barabash, R.Sh. Abiev, N.N. Kulov Theory and Practice of Mixing: A Review. Theoretical Foundations of Chemical Engineering 2018, Volume 52, Issue 4, pp. 473–487.
O.I. Malakov, S.A. Burlaka, Y.O. Mykhalʹova Matematychne modelyuvannya ta osnovy konstruyuvannya vibratsiynykh zmishuvachiv. Visnyk Khmelʹnytsʹkoho natsionalʹnoho universytetu, 2019, 5(277). Р. 30–33.
